Design Teams and Publications

Monday, September 25, 2017

WhoOOo Knew?!

Crafter Companion is totally spoiling us at Copic Boot Camp this year!  They have always been great sponsors.  I love the fact that even though it is Copic Boot Camp, where we go full-on Copics, Crafters Companion knows we are all working towards the same thing...being creative, and coloring our hearts out.  They sure do spoil!  Super Cool company!!
This year the attendees get to take home some awesome Colorista Paper pads and markers too, as well as some other fun goodies.  I took a moment to play with the Colorista markers and one of the 5x7 paper pads and created this card.   The Colorista Paper pads are fancy adult (or kid) coloring books.  They come in different sizes and are either partially foiled or glittered.  You can't go wrong with either!  I colored and cut this guy down to fit on 4.25 x 5.5 card front.  What fun use of a coloring page.  The paper is quite thick, so the bleed-through is very minimal.  They are also one sided images so you are not wasting the backside of the page ruining another image.

Thank you Crafters Companion for sending us the Spectrum Noir fun Colorista Paper Pads and goodies to play with!

If you are not attending this years event, Copic Boot Camp, you can check out the Spectrum Noir Colorista line of products HERE.  I totally would recommend you grab yourself some of the Colorista Paper Pads no matter what markers or colored pencils you use!!!



Saturday, September 23, 2017

Making the World Brighter 358 Colors at a Time

How about something a bit different today?  Well I have it for you!!  I did a little Zweckentfremdung.  What is this you ask?  It's a diversion from somethings proper use.  Well that is what an outside-the-box thinker does every chance they get.  Today I took my Sketch Copic's, Copic airbrush machine and my wonderfully new white Dr. Martens and created some magic.

Anything white is just asking for color! The world isn't black and white...it's over 358 shades of color don't you think?  At least in my color box it is!


The surface I colored has a slight gloss to it and is not porous in any way, so I thought this would be a perfect canvas for creativity!  I airbrushed what ever color made me happy at that moment...and they all did.
Once I was completely done, I spritzed it with 91% rubbing alcohol and watched the magic happen.  I will give them some time to completely dry (alcohol evaporating) and then try to seal them with leather sealer...fingers crossed it works...and if not I will wipe them down and do it again.  The world is a better place with Dr martens and Copic Markers...at least my world!


What kind of Zweckentfremdung will you come up with?  Get that mind thinking outside-the-box!




Friday, September 22, 2017

Wishing You a Love of a Lifetime - HOP


Here is a card I made for a very special lady, Marcy,  on a very special day like today!  I used one of her own delicious images "Apples in Seasons" from Power Poppy.  I really enjoyed the extra time it took to create this for an amazing person and her husband!


Marcy and Doug - Oh happy day!!  Congratulations on this special day of marriage!  May you continue to grow in love FOR each other.  May you wake up every day to the love of your life, and go to bed with a feeling of being complete.  May the bumps in the road be only that, a bump, bringing more adventure and memories.  That you will looks back and say you are stronger together because of it all.  May you share a lifetime of love that grows stronger with every breath.  With rain comes blossoms, with love comes strength.  Hoping this day brings blessings that last a life time!

Love you sweet Marcy (and Doug)!

Jennifer Dove

PS.  Doug, be forever good to your sweet lady,  or I will kick your Aspen...and your Sage Brush!



Be sure and see the other lovely ladies creations for Marcy, and leave Marcy love HERE on the Power Poppy blog


Jennifer Dove - you are here


Copics:
YG01 YG03 YG17 YG67
BV00 BV01 BV02 BV04
R81 RV34 R89
E43 E44 E49

Dies:





Sunday, September 17, 2017

Color of the Day 227


***Please note that I color using the lightest color first, dark, medium and back to light.  I only slightly blend the edge of the last color placed.  Then add the shadow. 

If you miss one of the combo's you can find it on the side of the blog labeled "Color of The Day".  Please realize that your computer screen and printer can change the way you see it or how the colors print, but if you try it yourself you will get some fun combos...promise!

Also, feel free to pin them.  I ask that you do not sell them printed out, do not place them on your personal blog but rather link to mine.  These are for personal use only.   Leave me some love if you want to see more!

Thank you to all my followers and fans from all over the world.

Saturday, September 16, 2017

Oh Mummy

A little Mummy love coming your way.  Thank you to this years newest Copic Boot Camp sponsor, Rhea, with Creative Basics Dies by Rhea.  She has some fabulous new dies out, that are manufactured through C.C. Designs.   Do you want to know what I did to make this?

All you need is the new Clouds to Waves die and I also used Cutting Edge Borders 1 Die set (but you can just use regular strips of paper).  Cut a 4.25 x 5 piece a paper so you have a top and bottom piece.  Draw eyes on the smaller piece (or add googly-eyes later).   I cut strips of papers and colored one of the edges of each strip.   I criss-crossed them and added shadows with my markers.  Next I used the Clouds to Waves die set...medium die, and cut the edge of the layers to remember a mouth.  Adhere over a piece of grey cardstock.  Quick, easy...DONE!

I added a sentiment using the new dies from My Favorite Things to finish it off.


Wednesday, September 13, 2017

Color of the Day 226



***Please note that I color using the lightest color first, dark, medium and back to light.  I only slightly blend the edge of the last color placed.  Then add the shadow. 

If you miss one of the combo's you can find it on the side of the blog labeled "Color of The Day".  Please realize that your computer screen and printer can change the way you see it or how the colors print, but if you try it yourself you will get some fun combos...promise!

Also, feel free to pin them.  I ask that you do not sell them printed out, do not place them on your personal blog but rather link to mine.  These are for personal use only.   Leave me some love if you want to see more!

Thank you to all my followers and fans from all over the world.

Tuesday, September 12, 2017

Copic Must Haves - Stencil Sheets

Ok...You must read this post!  Oh my, this was the craziest, fun project I just did!  I got this material X-Press It Stencil Sheets from Imagination International and have been racking my brain trying to think of something fabulous to do with it.  Although there are many uses I wanted something a bit unique.  All of a sudden BAM!  I thought of something and had to try.  I have included step by step on how it was achieved as well as what NOT to do...

For this project I used:

Cutting Knife
Cutting Mat
 Transfer Tape (I used packaging tape)
Printed Image
Piece of old sheet music
Copic Marker C9
Copic Blender Marker

Directions:

Stencil sheet packages come with extra thick vinyl sheets that are sticky on one side a thick piece of white protective cover on the other side.  This is a low tack product which is reusable over and over again.  It doesn't even leave residue on your projects.  You can use it with cutting dies, or computerized cutters.  Here is how I put it to use!

Step 1:  Print an image in black and white.  The simpler the image the better.  Tape the image to the non-sticky portion of the stencil sheet.  I would put two-sided tape on the back of the whole image so that when you cut it apart the portion you are keeping stays put, (...not like I did which was the hard way). 
   
Step 2:  Cut away the black portion of the image.  BE SURE your blade is sharp or it will not cut through the rubber-like stencil sheet.  Do not cut through the white protective cover of the stencil sheet.  If you have multiple pieces that are not connected put a piece of transfer tape over the non sticky side to hold the pieces in the right spots.  I didn't have transfer tape so I used packaging tape that I made slightly less sticky using lint from my jeans...it works but is not the best thing to use.

Step 3:  Remove all the cut-out "back portion" pieces.  This is called weeding an image.  All that you should have left is the portions that were white AND the white backing.  ***I didn't because my cuts didn't go through the rubber sheets due to dull knife.
Step 4:  Remove the white protective covering from the stencil sheet.  Place the sticky side of the stencil sheet down onto your paper.  I used old music paper because its soft and I can move the color around after airbrushing.

Step 5:  Remove the transfer tape and discard

Step 6:  Using the Airbrushing machine, airbrush around the stencil.  You can also use a distress ink pad instead if you don't have an airbrush machine

Step 7:  Remove stencil and using a blender pen soften edges of the image if desired.  (you can also use multiple marker colors to blend in towards the white area is the paper isn't soft like old  music sheets.




I hope you enjoyed the process and give it a try one of these crafty days.  I look forward to playing more with it too!!!

- Jenn Dove


Monday, September 11, 2017

You are Gorjuss!

 It has been a delight to work with 7Kids Craft Store.  They are a new sponsor for Copic Boot Camp this year and their online store is filled with yummy stuff at great prices.  They carry the Gorjuss collections and I am so in love with these.   You can check them out HERE.  I know I am a new fan to these stamps and you will see a lot more of them from me.




Thank you to 7KidsCraftStore.Com


Copics:
E50 E51 E21 BV20  BV23
Hair E44 E49 C9
R24 E27 R27
C1 C3 C5 C7

Sunday, September 10, 2017

MEeOOoooW

First off a huge shout out to Bloobel Stamps for being such a great sponsor for Copic Boot Camp over the years.  Lisa is TOP KNOTCH!  Not only is she sweet, generous but also a fabulously quirky illustrator.  I love to call her my friend!  Every time I see a new released digital image,  I grin ear to ear.  I want them all...NEED them all!  Have you seen her latest?
This cute looking image "Cat Girl" is now available and I have to tell you I had a hard time deciding what color to choose for her clothes.  She has so many themes she could be dressing up for.  Halloween, Christmas, snow fun, Easter, a night with the hubby (wanted to see if you were still reading).  You gotta snag her up and check out the other stuff Lisa has going on in the store.



I used Pinky Rectangles from CC Designs to finish her off.  This Die set is normally $23.00 and is on sale for $6.90!!!  While supplies last...better get it now!!  Go HERE



Copics:
E50 E51 E21 BV20 BV23
R81 R83 R85
G20 G21 G24
C1 C3 C5 C7 C9 100

Tuesday, September 5, 2017

A Big Thank You

My Favorite Things, you ARE totally awesome!!  This adorable clear set "springtime critters" is just the sweetest!
I wanted to give a shout out to My Favorite Things.  They have been such an amazing sponsor for the Copic Boot Camp Event.  They have beautiful stamps, dies and more and everyone that is attending this years event is going to be getting some MFT yumminess.  They are such a blessing and run their company with such a sweet and creative spirit...even down to their shipping packages.  If you are not familiar with their products you can find their store HERE

Copics:
E81 84 87 89
G20 21 24
C00 1 3 5 

You can find this set Springtime Critters HERE

Dies:


Merriest Berries

Feeling festive with this new digital stamp from Power Poppy - Merriest Berries.  I enjoyed taking a moment for some relaxing downtime even if it was at 620am.  I have got to utilize every quiet moment around here.  I really tried to keep this card clean and simple.  Yes, this is MY clean and simple!

I fussy cut around a portion of the image so I could slip in the Lawn Fawn Cross-stitched die under some of the ribbon and leaves.  It added that perfect something to this card to complete it.  You can grab your Power Poppy digital now as its just been released!!  All colors and links below!


Copics:
Ribbon R20 21 22 24
Candy Cane C00 1 3 5, R35 29 59
Holly G20 21 24 28
Mistletoe BG90 93 96 99 G20
Mistletoe Berries BG90 C3 BV20
Shadows BV20 BV23


Sunday, September 3, 2017

I Have Happy Feet

I am in the middle of moving into an RV full time and incorporating a studio that can travel.  As I was sorting what is staying and what is going to be given away to friends (due to weight and space in an RV),  creativity got the better of me and I stopped organizing for enough time to create something super fun.  Using the Tonic Studios die "Happy Penguin" I grabbed the 8"x8" Christmas Wishes paper pack that I had been holding on to for some special cards.

Did you know Tonic has paper packs?  They come in 8"x8" and have 3 single sided sheets of each pattern.  I was pleasantly surprised they even had 6 sheets of sentiment toppers in the one I have.  I love that they are single sided too...that way I don't waste a cool pattern on the back.

I started out with cutting the die on black cardstock.  The Happy Penguin die gives a beautiful thin lined image that is nice on its, own but I can never stop with simple...I have to load it up.


Next I ran the die through my die cut machine and embossed the image on white cardstock with a rubber spacer so I could see the impression of the die but it wouldn't cut through the paper (I got lazy and didn't test my pressure or mist the paper with water first so it wouldn't crack, but I was going to color it anyways so I didn't redo it, pretty much got lazy).

Once both pieces were done I colored in the spaces that would show through the die cut lines and then glued down the black cut out piece directly over the uncolored portion.  I also created a second lined piece using white so I could color and cut out the beak and the feet.

I then assembled the card...I added Nuvo Crystal Drops White for the snow around the main image.  I also added buttons with nice fat Nuvo drops on them.  Have you tried this and had the Nuvo drops sink into the button holes creating uneven drops?  A simple fix is to add a mini Glue Dot to the top o the button and then add the Nuvo on top of the Glue Dot, that way its can't sink into the holes.  You are welcome!

Make sure when you are coloring it up you do some fun cast shadows on the outside of the image to make it look dimensional.  It's the wow factor!

All I can say is this was super fun and easy to create!  Now back to organizing my RV studio so I can play more later.